New Products from Synergy Manufacturing

Jeep JK 1.5″ Diameter Tie Rod

• Heavy duty tie rod for Jeep JK Wranglers
• Bent similar to factory bar to clear sway bar mounts
• Now made from 1-1/2″ x .188 wall 4130 Chromoly and Heat Treated for maximum strength – over 200% stronger than stock tie rod
• Synergy Double Adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle
• Strongest Jeep JK Tie Rod on the market!
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Tie Rod requires the use of a maximum 4-3/4″ backspace wheel or the use of a wheel spacer on factory wheel. 4-1/2″ back spacing is recommended
• Tie Rod comes with our own HD Metal on Metal Tie Rod Ends, 4131-L & 4139-L

Includes:

• (2) Heavy Duty Tie Rod Ends
• (1) Castle Nut and Cotter Pin
• (1) Heat Treated Chromoly Tie Rod
• (1) Grade 8 Pinch Bolt & Hardware
• (1) Synergy Double Adjuster Sleeve
• (1) Hex-Style Tube Insert

Notes:

• Supersedes Part Number: 8002, Synergy 1-3/8″ diameter JK HD Tie Rod
• Requires use of stabilizer clamp Part Number: 4050-50 or 8007-03 stabilizer relocation kit.
• Compatible replacement tie rod ends (4131-L & 4139-L) Both Ends use Left Hand Threaded Joints
• Compatible with Reid Racing High Steer Knuckles (JK001)
• Requires 16″ or larger wheel diameter

Min/Max Lengths:
Measured in a straight line from zerk fitting to zerk fitting

• MAX EXTENDED: 60.4375″
• MIN COLLAPSED: 58.188″

JK High Mount Fox stabilizer kit, update to 1.5″ Diameter

Part Numbers:

• 8007-03 – Jeep JK High-Mount Stabilizer Relocation Kit for 1.5″ Tie Rod
• 8007-03-RHD – Jeep JK RHD High-Mount Stabilizer Relocation Kit for 1.5″ Tie Rod

Description:

Synergy High-Mount Stabilizer Relocation Kit for Jeep JK, used to relocate the stabilizer above the factory tie rod location

Kit Includes:

• FOX-982-24-941 – Synergy Tuned Fox 2.0 Performance Series IFP Stabilizer
• 8007 – Jeep JK Fox/Synergy Steering Stabilizer Mount OR 8094 – (RHD) Jeep JK Fox/Synergy Steering Stabilizer Mount
• 4050-50 – Jeep JK Steering Stabilizer Clamp for 1.5″ Diameter Tie Rod 
• Note: Not compatible with stock JK tie rod or previous 8002 tie rod. Supersedes 8007-03 / 8007-03-RHD kits for 1-3/8″ tie rods.
• Available in Right Hand Drive (RHD)

Note: 8007-13 requires minimum 2″ bump stop spacer; 8007-13-RHD requires minimum 1″ bump stop spacer.